Challenges and opportunities in the post-silicon power semiconductor world

Silicon Power Semiconductor

Since the inception of power semiconductor devices, the market has always looked for raising their breakdown voltage.

The breakdown voltage is the highest voltage applicable to the device before it breaks down and becomes non-functional.

Usually, semiconductor devices used in personal computers, tablets and other electronic equipment do not need to be able to withstand high voltages but the situation is very different when considering power semiconductor devices such as switches, IGBTs, MOSFETs among others.

Power semiconductor devices are used to control the operation of electric engines, smart grids, etc. and they usually operate at voltages that are too high to be handled by conventional semiconductor devices.

The breakdown voltage is directly linked to the material band gap and silicon, the material used in most semiconductor devices, has a band gap that is not wide enough to withstand high voltages. Other materials like silicon carbide and gallium nitride have band gaps up to three times that of silicon and this translates into a breakdown voltage that can be ten times as much as that of conventional silicon-built devices.

Using gallium nitride in power semiconductor devices is, however, not trivial: usually gallium nitride is deposited on sapphire substrates which are more difficult and more expensive to work with than conventional silicon.

Successful, production-scale deposition of gallium nitride on silicon would be an enormous breakthrough for the industry and several companies and research organizations are working hard on this; so far, however, the technology has yet to reach the full-production scale level

The main issue is that the two materials have very different crystal structures and depositing GaN over silicon produces internal stress within the structure and this may lead to cracks.

Few pioneers such as Efficient Power Conversion have tried to overcome the problem by adding a buffer layer and growing GaN epitaxially over it, but the process is still very costly even if it is expected that prices will go down sensibly as shipping quantities increase

If gallium nitride will be general adopted by the industry in the power semiconductor market, this will be at the expenses of another material which is another strong candidate for replacing silicon: silicon carbide

Silicon carbide wafers have been in the market for quite a while now, but due to their crystal structure, similar to that of diamond they are quite hard to process

Some companies, such as Anvil Semiconductor, have proposed a new approach to the problem by depositing silicon carbide on silicon wafers, therefore substantially reducing the costs of production

Whether silicon carbide or gallium nitride will come out as the winner in the competition as material of choice in the power semiconductor market remains to be seen but what looks quite clear already now is that soon the reign of silicon will be over.

The shift from silicon to gallium nitride, however, is not expected to be easy and without hurdles.

Paradoxically, one of the main issues that may hinder the adoption of GaN-based inverters in the automotive industry is the very quick switching time of GaN-based devices when compared to silicon. Switching times of GaN-based devices can be in the order of few MHz, way too much what is needed for motor drives that work with switching rates of few tens of KHz at best.

As explained by Marco Palma, Director of Systems and Applications at International Rectifier, “using gallium nitride for switching applications in the automotive industry is a little bit like using a Ferrari to go shopping“

Another big issue with adoption of gallium nitride is heat dissipation.

While silicon carbide has a good thermal conductivity, gallium nitride is not exactly performing well in this regard and, in order to avoid the heat to literally melt the metal wires, the whole package needs to be properly designed to convey the heat of out of it.

Companies like GaN Systems are currently considering possible solutions such as diamond heat spreaders to fix the issue.

If you are interested in GaN deposition services, please visit our GaN MOCVD deposition service page.

Subscribe to our newsletter to receive our new articles directly in your mail box.

If you liked this article, please give it a quick review in StumbleUpon, Facebook or Pinterest.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title="" rel=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>